Inateck P7 Bedienungsanleitung Seite 6

EN
c) Insert the USB adapter into a computer. The indicator of the adapter flashes once along
with a long high tone, which indicates a successful pairing. Unplug the adapter and
then pair the next one with the P7 barcode scanner. No operation is required on the
barcode scanner in this process.
d) If all the adapters have been paired with the P7 barcode scanner, please short press the
trigger on the barcode scanner, and the pairing stops.
Note : The more USB adapters a P7 barcode scanner is connected with, the longer
transmission time it takes. A P7 barcode scanner can pair with 8 adapters at the most.
Bluetooth Mode(HID)
The Bluetooth mode (HID) is not a default mode. To switch to this mode, please scan the
setting barcodes in sequence " Enter to setup" - "Bluetooth Mode (HID) " - " Exit with Save"
Enter Setup
Exit with Save
1. Power on Inateck P7 by toggling switch from OFF to ON.
2. Scan "Enter Setup" barcode and then "Bluetooth Pairing", P7 will enter Bluetooth pairing
status.
Enter Setup
4
Pair one scanner with multiple USB adapters
Bluetooth Mode (HID)
Bluetooth Pairing