Safety Instructions - Ape Labs APE FORCE ONE Bedienungsanleitung

ape labs apeforceone user manual

SAFETY INSTRUCTIONS

This device has left our premises in absolutely perfect condition. In order
to maintain this condition and to ensure a safe operation, it is absolutely
necessary for the user to follow the safety instructions and warning notes
written in this user manual.
Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability for any resulting defects or
problems.
If the device has been exposed to drastic temperature fluctuation (e. g. after
transportation), do not switch it on immediately. The arising condensation
water might damage your device. Leave the device switched off until it has
reached room temperature.
Be careful with your operations. With a dangerous voltage you can suffer
a dangerous Electric shock when touching the wires!
Please make sure that there are no obvious transport damages. Should you
notice any damages on casing, do not take the device into operation and
immediately consult your local dealer.
This device falls under protection-class II.
There must never be any objects entering into the device. This is especially
valid for metal parts. If any metal parts like staples or coarse metal chips
enter into the device, the device must be taken out of operation immediately.
Never remove the serial barcode from the device as this would make the
guarantee void.
If this device will be operated in any way different to the one described in this
manual, the product may suffer damages and the guarantee becomes void.
14