Getting.started; Installing.the.batteries; Initial.signal.reception.after.power.up; Daily Automatic Time Update - LEXIBOOK RP170 Design TimeProjector Bedienungsanleitung

Getting Started
Installing the Batteries
1..Lift.the.tab.on.the.battery.door.located.at.the.bottom.of.the.clock.with.
a.screwdriver..
2. Put in batteries with proper polarity (+) and (-).
..Close.the.battery.door.
Initial Signal Reception after Power Up
1. The clock will search for the time signal and display the time
automatically.
..If.the.initial.reception.fails,.the.clock.will.search.for.the.signal.every..
hours.

Daily Automatic Time Update

Once the initial reception succeeds, it will receive the time signal daily
during.mid.night.

Manual Time Update

Reception.can.be.started.anytime.by.pressing.the.SET/WAVE.button.
Note:.Frequent.use.of.this.feature.may.affect.battery.life.
Downloaded from www.Manualslib.com manuals search engine
18