Replacing The Pick Pad Assembly - Lexmark X4500 Option Serie Installationsanleitung

16
Downloaded from www.Manualslib.com
Replacing the pick pad
manuals search engine
If you still experience problems with
assembly multiple sheets of paper feeding through
the automatic document feeder, you may
need to replace the pick pad assembly.
To order a replacement pick pad
assembly, go to the Lexmark support
Web site at http://support.lexmark.com.
The part number for the replacement
pick pad assembly is 12G3758.
1
Turn the scanner off and unplug it.
2
Open the automatic document
feeder.
3
Remove the pad assembly by
squeezing and pulling out the pad
clamp.
4
Squeeze the new clamp and place
it gently in the pad holder.
5
Close the automatic document
feeder.
6
Plug the scanner in and turn it
back on.
Maintaining your MFP