Step 5: Configure Your Mfp; Setting The Ip Address - Lexmark X4500 Option Serie Installationsanleitung

Step 5: Configure your MFP

Setting the
IP address
8
Downloaded from www.Manualslib.com
The following settings are the minimum required to perform basic
functions such as print, copy, fax, or e-mail. Some of these settings
may require assistance from your network administrator.
You must have an IP address for network devices to find the MFP on
the network. If you have DHCP , the proper address values are
automatically assigned.
To check your IP address, or to assign one manually if you do not
have DHCP:
1
2
3
4
5
6
After configuring the IP address, you can use your Web browser to
remotely view and manage the MFP . Type the IP address in the URL
field of the browser (for example, http://192.168.236.24), and then
press Enter.
manuals search engine
From the Home screen, touch the Key icon, and then touch
System Configuration.
Under Printer/Print Server, touch Setup and Configuration.
Under the Print Server, touch TCP/IP .
Address, Netmask, and Gateway are required fields, and
should have nonzero values. If necessary, use the virtual
keyboard and enter the appropriate information for your
network. Set any additional information you want.
Touch Submit when you are finished entering information.
Wait for the configuration page to refresh, and then verify the
parameters are as intended.
Configure your MFP