THOMSON VS470 Bedienungsanleitung Seite 7

01_VS470_en
1.
2.
3.
4.
Special operating details:
•
•
•
•
Downloaded from www.Manualslib.com
24/08/04 10:34 Page 7
Switch on the transmitter (1) and the receiver (5) by switching their off/on buttons to the on
position.
Make sure that the transmitter and the receiver are set to the same channel by
checking the position of the selectors located under the casing or under the
antenna.They must be set to the same channel (same letter).
Switch on your equipment (television sets, video recorders ...) in both rooms.
Using the remote control of the unit whose pictures you wish to see, and from the room
containing the second television set (TV2), select the channels or video functions (or others)
according to the unit you are controlling.
No picture on TV2? If you fail to obtain the desired picture on the second television set TV2, select
the AV socket, to which the receiver (5) is connected, using the television's remote control.
Using a decoder (in France: Canal +,TPS, etc.) on your TV2? To have clear images on your
second TV set (TV2), output from the decoder must pass through a VCR player, placed in (AV2) mode
or set to the channel number assigned for the encrypted TV channel.
Use of a monitor? If your second television set does not have a connection for an outside aerial
(terrestrial reception), or if it is a monitor, you will be able to see the channels in the room containing
the second television set by selecting those of the video recorder with its remote control.
The picture is scrambled? The running of certain equipment (micro-wave ovens, digital telephone
DECT, un-shielded acoustic loudspeakers, etc ...) may interfere with signal transmission. Ensure that
they are kept away from the transmitter and the receiver or switch them off.
manuals search engine
Instructions for use
Make sure that you point the
remote control directly at the
receiver's (5) infrared window
7
EN
EN
Receiver