Data Robotics drobo-Serie Benutzerhandbuch Seite 34

DroboElite
The iSCSI window allows you to configure your iSCSI connection(s) on
your DroboElite. The iSCSI ports are automatically configured (default)
as shown in the screenshot above for a DroboElite. If you want or need
to assign a specific IP address for your iSCSI connection(s), simply
replace the default information accordingly. If you are connecting your
DroboElite to a switch or router, first connect the DroboElite via USB to
set the IP address(es). Then, switch to the iSCSI connection.
Note: If you are connecting multiple DroboPros and/or DroboElites to one
computer, setting unique IP addresses is required.
25
Downloaded from www.Manualslib.com manuals search engine