Caring For And Cleaning Your Appliance; Cleaning The Outer Surfaces; Cleaning The Door; º Disassembling The Door - THOMSON BOT610MXD Einbau- Und Betriebsanleitung

99644971_a_en.qxp

CLEANING THE OUTER SURFACES

• •
To clean both the electronic programmer window and the oven door, use a window washing
product applied to a soft cloth.
Do not use abrasive creams or scouring sponges.

CLEANING THE DOOR

• •
• • Disassembling the door
appliance to cool down.
- Open the door completely and block it open
using the two red stops (fig.1).
They are supplied with your machine in the
plastic pack.
- Remove the first attached window as follows:
Insert the two red stops in the A A slots
designed for this (fig.2).
Lever these parts to release the glass (fig.3).
- Clean the glass using a soft sponge and
washing-up liquid.
Do not immerse the glass in water.
Do not use abrasive creams or scouring
sponges. Rinse with clean water and dry off
with a lint-free cloth.
products or hard metallic scrapers for
cleaning the oven's glass door, as they
could scuff the surface and cause the glass
to shatter.
Downloaded from www.Manualslib.com
18/12/2007

4 / CARING FOR AND CLEANING YOUR APPLIANCE

Warning
Before removing the glass, allow the
Warning
Do not use abrasive cleaning
manuals search engine
15:01 Page 11
A A
11
EN
fig.1
A A
fig.2
CLIC
CLIC
fig.3