Installing Windows - ASROCK 939NF6G-VSTA Handbuch

Downloaded from www.Manualslib.com
2.13.2 2.13.2 2.13.2 2.13.2 2.13.2

Installing Windows

Installing Windows Installing Windows Installing Windows Installing Windows
RAID Functions RAID Functions RAID Functions RAID Functions RAID Functions
If you want to install Windows
SATAII HDDs with RAID functions, please follow below steps.
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [RAID].
STEP 2: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 3: Install Windows ®
system.
Insert the Windows ® Vista TM
drive to boot your system, and follow the instruction to install Windows
Windows ® Vista TM 64-bit OS on your system. When you see "Where do you want to
install Windows?" page, please insert the ASRock Support CD into your optical drive,
and click the "Load Driver" button on the left on the bottom to load the NVIDIA
®
drivers. NVIDIA RAID drivers are in the following path in our Support CD:
.. \ I386 \ Vista (For Windows
.. \ AMD64 \ Vista64 (For Windows
After that, please insert Windows
the optical drive again to continue the installation.
NOTE. If you install Windows
manage (create, convert, delete, or rebuild) RAID functions on SATA / SATAII HDDs,
you still need to set up "SATA Operation Mode" to [RAID] in BIOS first. Then, please set
the RAID configuration by using the Windows RAID installation guide in the following
path in the Support CD:
.. \ RAID Installation Guide
2.14 2.14 2.14 Untied Overclocking T Untied Overclocking T Untied Overclocking Technology Untied Overclocking T
2.14 2.14 Untied Overclocking T
This motherboard supports Untied Overclocking Technology, which means during
overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you
enable Untied Overclocking function, please enter "Overclock Mode" option of BIOS
setup to set the selection from [Auto] to [CPU, PCIE, Async.]. Therefore, CPU FSB is
untied during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can
operate under a more stable overclocking environment.
Please refer to the warning on page 6 for the possible overclocking risk before
you apply Untied Overclocking Technology.
ASRock
manuals search engine
Vista Vista Vista Vista Vista / Vista / Vista / Vista / Vista / Vista 64-bit With 64-bit With 64-bit With 64-bit With 64-bit With
TM TM TM TM TM TM TM TM TM TM
®
® TM ® TM
Vista or Windows Vista 64-bit on your SATA /
Advanced screen
Vista TM / Windows ® Vista TM 64-bit OS on your
/ Windows ® Vista TM 64-bit optical disk into the optical
® Vista TM OS)
® TM
Vista 64-bit OS)
® Vista TM / Windows ® Vista TM 64-bit optical disk into
® Vista TM / Windows ® Vista TM 64-bit on IDE HDDs and want to
echnology echnology echnology
echnology
939NF6G-VSTA Motherboard
IDE Configuration.
® TM
Vista /
® RAID
2 3 2 3 2 3
2 3 2 3