PCL NEXUS serie Bedienungsanleitung Seite 4

NEXUS Generator & Inflator user manual
General Specifications
System set-up instructions
1. Connect to air supply by screwing your chosen adaptor to the
Rp 1/4 fitting (1/4 NPT for US versions) into the compressed air
inlet port, See Fig. 7. Then connect your air supply coupling end
to the adaptor. Please note the N6 version has a combination
filter unit.
2. Connect the mains power lead to the IEC socket at the back of
the unit cabinet as shown in FIG 8.
3. Turn on/off switch to the 'on' position shown in FIG 9.
4. Locate hose output quick connect couplings at the bottom of
the unit and connect all four hose adaptor ends to these shown in
Fig 10. Please note on the N6 version the blanking plugs shown in
Fig 10 will be populated with coupling connections.
Fig 7
N6 Version
Fig 8
www.pclairtechnology.com
Fig 9
Fig 10
Blanking plug