RIBA ZS Serie Handbuch Seite 16

Thank you for choosing this RIBA scale.
designed for simple and straightforward use.
If you have any queries or experience any problems not adressed in the operating instructions,
please contact your RIBA professional service partner.
Before putting the scale into use, please read with care the information given in the operating
instructions.
They contain important instructions for installation, proper use and maintenance of the appliance.
The manufacturer shall not be liable for damages arising out of failure to heed the following
instructions.
When using electrical components under increased safety requirements, always comply with the
appropriate regulations. Never perform work on the appliance wile the power is switched on.
Improper installation will render the warranty null and void.
The device is designed for use within buildings. Observe the permissible ambient temperatures for
use (Technical information).
The device meets the requirements for electromagnetic compatibility. Do not exceed the maximum
values specified in the applicable standards.
If you have any problems, contact your local RIBA professional service partner.
It is sufficient to clean the scale with a moist cloth and a regular cleaning agent. Do not use any
scourers.
The scale does not require any routine maintenance. However, we recommend to check the scale's
accuracy at regular intervals. The regularity of these checks depends on the level of use and the state
of the scale. If any inaccuracies occour, please contact your local dealer or RIBA professional
service partner.
Interference suppression of the unit corresponds to the valid directive.
The display value may be influenced by extreme electro-magnetic interference, e.g. operation of a
radio unit or a mobile phone in the immediate vicinity of the unit. When the electrostable interference
is no longer present. The unit again be used for its intended purpose. You may need to switch it on
again. If there is permanent electrostable interference, we recommend earthing the platform.
The unit is a measuring instrument. Air currents, vibrations, rapit changes in temperature and direct
sunlight may have an effect on the accuracy of the scale. The scale is potected to IP 54 protection class.
Therefore, avoid high levels of humidity, vapours, agressive liquid media and strong contamination.
© RIBA WEEGTECHNIEK BV
GB
14