How To Use - Ohyama woozoo STF-DC15T Bedienungsanleitung

How to use

1
Place the product in a smooth place and
insert the power plug into the socket
2
Press the Power On / Off button to power
on the product
If the power plug is not unplugged, it will operate in
the mode set before the previous shutdown.
You can also operate using the power button on
the remote control.
Power on the product in the closed state of
oscillating Up / Down, then the fan starts to run
in the downward state. If it faces towards the
front, change the direction manually or change the
direction after turning On / Off the Oscillating Up /
Down button.
3
Select the air supply mode as required
Each time the Air Supply button is pressed, the
mode is switched once.
Continuous
Please use the remote control to press the button
of the desired mode.
Natural Wind Sleep
Continuous
Operate according to the air volume set by
pressing the Air Volume button.
Natural Wind
The air volume is switched to the natural wind
mode. P12
Sleep
It switches to the Oscillating Up / Down mode.
The positive and upward operation directions
change the intensity, blowing the wind that is best
for sleep. P12
● Remember the air volume and oscillating settings
selected in each mode. If the mode is reselected
while the power cord is connected, it will run in
the mode set before the previous shutdown.
4
Set the air volume
Set the air volume by pressing the Air Volume
button.
Press the High button, the air volume becomes
higher; press the Low button, the air volume
becomes lower.
In the Continuous mode, press and hold the
Air Volume button, then the air volume changes
continuously.
The Continuous mode has 10 shifts, and both of
the Natural Wind and Sleep modes have three
shifts.
Natural Wind mode, Sleep mode
Low
Medium
High
7