Height Adjustment - Ohyama woozoo STF-DC15T Bedienungsanleitung

How to use

■ Height Adjustment

Press the Height Adjustment button and slide
the upright rod, then you can adjust the height as
required (4 shifts is available).
● Please press the upright rod to the lowest place
and fix it while moving the upright rod.
■ Oscillating
Left / Right Oscillating
Each time the Left / Right Oscillating button
is pressed, the indicator light will turn on in the
following order and then oscillate left and right.
60° 90°
60°
60°
90°
90°
120°
120°
● The Left / Right oscillating angle cannot be
manually changed. Be sure to press the Left / Right
Oscillating button in the order of Oscillating Down
Stop to change the angle.
Continue
Height Adjustment
button
120° Off
(Stop oscillating)
Oscillating Up / Down
Each time the Oscillating Up / Down button is
pressed, it switches to On / Off. When it is set to
On, the indicator light turns on.
-15°
If the Sleep mode is selected, the oscillating Up /
Down automatically switches to On after it is Off.
P12
You can manually change the Left / Right oscillating
angle.
After the oscillating Up / Down angle is manually
changed, the product will stop at the upper or lower
end for a few seconds. This is normal.
10
Light on
90°