Intended Use; General Safety Instructions - Simons Voss Technologies SmartCD.HF Kurzanleitung

SmartCD.HF

1 Intended use

The SmartCD.HF is an ultra-flat programming device with which you
can conveniently write and read SmartCards. SmartTags and RFID
inlays are also supported.
The SmartCD.HF is ideal if you only use hybrid locking devices. While
you program the locking devices with a suitable active programming
device, you can conveniently program the RFID identification media
with the SmartCD.HF.
Programming locking devices is not possible with the SmartCD.HF.

2 General safety instructions

Signal word (ANSI Z535.6)
DANGER
WARNING
CAUTION
IMPORTANT
NOTE
EN
Possible immediate effects of non-com-
pliance
Death or serious injury (likely)
Death or serious injury (possible, but un-
likely)
Minor injury
Property damage or malfunction
Low or none
1. Intended use
17 / 96