Nextview - Sony Trinitron KV-28FX65 B Bedienungsanleitung

Operation

NexTView*

Individual Setting
When you select
limiting the search to the marked ones.
1. Select using v or V. Push B to enter.
The menu Individual Settings is displayed.
2. Select the item you wish to mark using v or V. Confirm by pressing OK.
Repeat step 2 for all the items you wish to have in your list.
3. When finished with the list, select
Using the 'Long Info' menu
1. Select a future programme in the column programme list using v or V. Press OK.
The long info menu is displayed.
You may wish to record the selected programme with your VCR.
(only with Smartlink VCRs)
using b and press OK.
2. Select
This information is transferred to the VCR connected to your set.
Setting up your VCR
3. Select VPS/PDC by pushing b repeatedly.
With this setting on, you have the guaranteed recording of the whole broadcast
should there be a change in the TV programme. This only works if the selected
channel broadcasts a VPS/PDC signal.
• Select On or Off using OK.
4. Select Speed using V.
Select between standardplay (SP) or longplay (LP) mode.With longplay you can
record twice as much on a videotape. The picture quality, however, may suffer.
• Select SP or LP using OK.
5. Select VCR Setup using V.
Select with which of the connected Smartlink VCRs you wish programme.
• Select VCR 1 or 2 using OK.
using B. Press OK.
6. Select
You are back in the last menu.
there will be no personal pre-selection.
using B and press OK.
First nextTView/EPG-Providers in Europe
07 Tue
SWISS
12:38
Address Mapping
The position of the addresses in the
OSDA is shown in the following diagram.
The position values of the DPW are set
to '0'.
If other values are set, the complete
combination will be scrolled.
Example:
if the DPWC is set to '63', the char-
This channel has been set for a timer
VPS/PDC
Speed
Timer Prog
lets you make your own individual selection of themes,
TXT TPS / RINGIER
Tue 07. 04 .98
On
SP
VCR1
nexTView
11