Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1
On the Tools menu, click Internet Options.
The Internet Options dialog box appears.
2
On the Connections tab, click LAN Settings.
The Local Area Network (LAN) Settings dialog box appears.
3
If the Use a proxy server for your LAN (These settings will not apply
to dial-up or VPN connections) dialog box is selected, clear the check
box and click OK.
When using Netscape:
1
Start the Web browser on the computer used for the Wireless LAN
Converter setup.
2
On the Edit menu, click Preferences.
3
In Category, click Advanced and click the Proxies button.
4
Select the Direct connection to the Internet box and click OK.
5
When the Wireless LAN Converter setup is complete, return the proxy
setting to its original condition.
Case 5 - I cannot use the Encryption (WEP) key input field
on the Wireless LAN Converter Setup Page
Did you select Enabled under Encryption (WEP)?
The Encryption (WEP) key input field is only available if the Enabled setting
is selected.
To select the Enabled setting, proceed as follows:
1
Set Encryption (WEP) to Enabled.
2
Select the Key Length.
3
Enter the Encryption (WEP) key in the input field.
The prescribed length of the string depends on the Key Length settings. Check the
indication above the input field.
Case 6 - I cannot communicate with the Access point
although the STATUS indicator is slowly flashing white
Did you enter the Encryption (WEP) key correctly?
Even if the Network Name (SSID) is correct, an incorrect Encryption (WEP) key
prevents communication with the Access Point.
To enter the correct Encryption (WEP) key, proceed as follows:
1
Check the Encryption (WEP) key setting of the Access Point.
2
Re-enter the correct Encryption (WEP) key of the Wireless LAN Converter.
8
Downloaded from
www.Manualslib.com
manuals search engine
Werbung
