Sony PCWA-DE30 Leitfaden Zur Fehlerbehebung Seite 4

Introduction
Case 1 - The Converter is not detected by the Setup Utility
or it is impossible to establish a network connection
Is the Wireless LAN Converter connected correctly to the
computer?
Check the connections between the Wireless LAN Converter and the computer
(3), the Wireless Unit (4) and the Power Unit (1), and the Power Unit (1) and
the power outlet (2).
When the power is supplied to the Wireless LAN Converter, the STATUS indicator is lit or
flashing. However, if the indicator is set to OFF in the Wireless LAN Converter Setup Page,
the indicator only operates in special cases.
When the Wireless LAN Converter is connected to a computer or other device, the LINK/
ACT indicator flashes. For details about the location of the LINK/ACT indicator, refer to
the Quick Start Guide.
Is the Ethernet device inside the computer enabled?
To check whether the Ethernet device inside the computer is enabled, proceed
as follows:
When using Windows Me:
1 Right-click My Computer on your desktop, and click Properties on the
shortcut menu that appears.
2 In the System Properties dialog box, click the Device Manager tab.
3 Double-click Network adapters to display a list of adapters and verify
that the Ethernet adapter you are using is enabled.
You can also display detailed information by right-clicking your adapter and clicking
Properties on the shortcut menu that appears.
4
Downloaded from www.Manualslib.com manuals search engine