Figure 1-8. Removing The Microprocessor Cage And - Dell PowerEdge 8450 Aufrüstungshandbuch

support.dell.com
Downloaded from www.Manualslib.com
11. To release the microprocessor cage from the tray, perform the following steps:
a. Locate four rounded tabs on each side of the tray. Behind each are a pair of
tabs at the end of a plastic tab/latch assembly.
b. Squeeze the tabs (step 1 in Figure 8) and pull them out (step 2 in Figure 1-8).
c. This action releases the metal cage from a slotted plastic support. After all
four pair of tabs/latches are extended, lift the microprocessor cage away
from the microprocessor boards (step 3 in Figure 1-8).
microprocessor cage
plastic tab/latch
assembly (4)

Figure 1-8. Removing the Microprocessor Cage and

Microprocessor Boards
12. Using the extractor tool, lift each microprocessor board off the profusion board,
being careful not to flex the boards.
manuals search engine
microprocessor
boards (2)
profusion board
squeeze-tabs
Microprocessor Board Upgrade Guide 1-11