Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1-10
Microprocessor Board Upgrade Guide
Downloaded from
www.Manualslib.com
10. To remove the control panel tray, perform the following steps:
a.
Using the 1/4-inch nut driver, remove the ten screws securing the micropro-
cessor cage and the control panel tray to the chassis (see Figure 1-7).
control
panel tray
tray extractor levers (2)
Figure 1-7. Removing the Control Panel Tray
b.
Rotate the two tray extractor levers on each side of the control panel tray
toward you (see Figure 1-7).
c.
Pull the control panel tray forward to clear it from the chassis, and place the
tray on a clean antistatic mat.
manuals search engine
microprocessor cage
screws (10)
Werbung
Kapitel
Inhaltsverzeichnis
