Figure 1-3. Removing The Front Bezel - Dell PowerEdge 8450 Aufrüstungshandbuch

1-6 Microprocessor Board Upgrade Guide
Downloaded from www.Manualslib.com
7 . To remove the front bezel of the computer, perform the following steps:
a. Press the right edge of the system badge on the front bezel to release the
catch on the system badge. Press the left edge of the system badge to
access the keylock (see step 1 in Figure 1-3).
system badge
front bezel

Figure 1-3. Removing the Front Bezel

b. Using the key provided with the system, unlock the bezel (step 2 in Figure 1-3).
c. Grasp the bezel by its upper and lower edges and pull the bezel forward to
disengage the mounting pins on the bezel from the system chassis (step 3 in
Figure 1-3).
8. To remove the memory board(s), perform the following steps:
a. To remove the memory-board cover, loosen the four captive thumbscrews
securing the memory-board cover to the front of the system chassis. Pull the
cover directly away from the system (see Figure 1-4).
manuals search engine