Set Up For Windows 98/Me - SanDisk Connect ComapctFlash Bedienungsanleitung

Set up for Windows 98/ME

Install the Driver
Downloaded from www.Manualslib.com
There are three steps to setting up the Wireless LAN Card for use with the
Windows 98/ME operating systems.
1. Install the driver from the New Hardware Wizard.
2. Restart Windows.
3. Confirm the card is working.
When the Wireless LAN Card is inserted into the PCMCIA slot, Windows auto-
detects the card and opens the Add New Hardware Wizard. The wizard
guides you through the installation of the device driver for the Wireless LAN
Card.
1. On the wizard's Welcome screen, click Next to continue.
2. On the next Add New Hardware screen, select the radio button for
Search for the best driver for your device (Recommended).
3. Click Next.
4. Insert the CD-ROM for the Wireless LAN Card into the CD-ROM drive of
the computer.
5. Select the check box for CD-ROM drive.
6. Click Next. When Windows recognizes the card, the Windows Driver
Search window opens and displays the device name and
driver location.
7. To install the driver, click Next.
8. When the Insert Disk message appears, insert the disk labeled
'Windows 98 Second Edition or ME CD-ROM', and then click OK.
9. When the wizard has completed the installation, click Finish.
manuals search engine
Page 33