Set Up For Windows 2000 - SanDisk Connect ComapctFlash Bedienungsanleitung

Set up for Windows 2000

There are two steps to setting up the Wireless LAN Card for use with the
Windows 2000 operating system.
Install the Driver and Setup Utility
When the Wireless LAN Card is inserted into the PCMCIA slot, Windows auto-
detects the card and opens the Found New Hardware Wizard. The wizard
guides you through the installation of the device driver for the Wireless LAN
Card.
Confirm the Card is Working
Page 30
Downloaded from www.Manualslib.com
1. Install the driver from the New Hardware Wizard.
2. Confirm the card is working.
1. On the wizard's Welcome screen, click Next to continue.
2. On the Install Hardware Device Drivers screen, select the radio button
for Search for a suitable driver for my device (Recommended).
3. Click Next.
4. Insert the CD-ROM for the Wireless LAN Card into the CD-ROM drive of
the computer.
5. Select the check box for Specify a location.
6. Click Next. When Windows recognizes the card, the Driver Files Search
Results window opens and displays the device and driver names.
7. To install the driver, click Next.
8. When the wizard has completed the installation, click Finish.
1. On the Start menu, open the Control Panel, then select System Device
Manager.
2. Locate the Network adapters category.
3. Click the plus sign to open the list of installed network adapters.
4. The list should contain the Wireless LAN Card entry. If there isn't an
error icon next to the entry, the card is working.
manuals search engine