SanDisk Connect ComapctFlash Bedienungsanleitung Seite 24

Key Setting
To create encryption keys manually:
Character and Hexadecimal Ranges for 40-bit Encryption
Character and Hexadecimal Ranges for 128-bit Encryption
Authentication Type
The Authentication Type can be set to Open System or Shared Key.
Page 20
Downloaded from www.Manualslib.com
1. Select one key from the four Key Settings.
2. Tap Apply to assign the key setting.
1. Tap the WEP Key Type menu to pull down the key type list.
2. Tap Char or Hex.
3. In the Key in... field, tap in a character or hexadecimal string in the field.
4. Tap OK.
5. Select one key from the four Key Settings.
6. Tap Apply to assign the key setting.
5 characters in the range of A-Z, a-z, and 0-9
for example: MyKey
10 digit hexadecimal values in the range of A-F, a-f, and 0-9.
for example: 11AA22BB33.
13 characters in the range of A-Z, a-z, and 0-9
for example: MyKey12345678
26 digit hexadecimal values in the range of A-F, a-f, and 0-9.
for example: 11AA22BB33CAT456FENCE92647.
The default Authentication Type is Open System. Open system
indicates no encryption.
When the Authentication Type is set to Shared Key, WEP keys must be
used. The Pocket PC and the access point must use the same WEP
encryption key for Shared Key encryption.
manuals search engine