Installing The Wireless Lan Card - SanDisk Connect ComapctFlash Bedienungsanleitung

Installing the Wireless LAN Card

If your computer is equipped with a CompactFlash® Type 1 slot, insert the
Wireless LAN card into the slot.
If your computer has a PCMCIA slot, you need to use the
CompactFlash®/PCMCIA adapter that is included with the Wireless LAN Card:
A Caution About Voltage
The Wireless LAN Card supports 3.3V. If your computer does not support 3.3V,
use of the Wireless LAN Card might cause damage to the PCMCIA slot.
Page 24
Downloaded from www.Manualslib.com
1. Insert the Wireless LAN card into the CompactFlash®/PCMCIA adapter.
2. Insert the adapter with the card into the PCMCIA slot of your computer
Do not force the adapter into the slot.
If the adapter does not insert easily, remove it and then reinsert.
Forcing the adapter into the computer will damage both the adapter and
the PCMCIA slot.
manuals search engine
PCMCIA Adapter CompactFlash® Card