Synchronize Connections; Reset The Pocket Pc; Removing The Wireless Lan Card; Next Steps - SanDisk Connect ComapctFlash Bedienungsanleitung

Reset the Pocket PC

Removing the Wireless LAN Card

Next Steps

Downloaded from www.Manualslib.com

Synchronize Connections

The Pocket PC and Wireless LAN Card must be set to connect to the Internet
using the same settings:
1. In the Start menu, tap Settings.
2. Tap the Connections tab at the bottom of the display.
3. Tap Connections icon.
4. The setting for When needed, automatically... and the setting for My
network card... should be set to the same Internet settings.
To complete the set up, reset your Pocket PC.
If you do not need the connectivity of your Wireless LAN Card, it is
recommended that you remove the card from the Pocket PC to extend the life
of the battery.
When removing the Wireless LAN Card, you will lose your connection to
the network. Prior to removing the card, make sure you have closed all
files and network applications.
The Wireless LAN Card is now ready to use. The default settings for the card
function for a typical Infrastructure wireless LAN. In infrastructure mode, the
wireless network consists of at least one access point connected to the wired
network infrastructure and a set of wireless end stations
If you want to modify the configuration of the Wireless LAN Card so that you
have more control of your wireless network, see CONFIGURING THE WIRELESS
LAN CARD FOR USE WITH THE POCKET PC.
manuals search engine
Page 11