Werbung
G Setup & Use F Installation et utilisation
D Aufstellen und Gebrauch N Opstelling en gebruik
3
6
G IMPORTANT! Test sound reception of this monitor before first
time use and whenever you change location of transmitter
(see page 6).
1. Set transmitter channel switch to same channel as receiver.
2. Place transmitter in same room with child. Point micro-
phone directly toward crib or play area.
3. Unwrap and fully extend AC adaptor cord for best
transmission. Insert AC adaptor jack into transmitter
socket and plug into wall outlet.
2
5
G TRANSMITTER
F ÉMETTEUR
D SENDEGERÄT
N ZENDER
1
G RECEIVER
F RÉCEPTEUR
D EMPFANGSGERÄT
N ONTVANGER
1
4. Rotate transmitter power dial to turn power on. Power
indicator lights.
5. Place receiver where you will see or hear it.
6. Unwrap and fully extend AC adaptor cord for best
reception. Insert AC adaptor jack into receiver socket
and plug into wall outlet.
Note: To use a battery for power source, refer to "Receiver
Battery Installation" instructions on page 4.
7. Rotate receiver power/volume dial to turn power on. Power
indicator lights. Rotate power/volume dial to adjust volume.
8
4
7
Werbung
