Hilti TE 104 Bedienungsanleitung Seite 8

genuine replacement parts. This
will ensure that the safety of the
power tool is maintained.
2 Additional safety precautions
2.1 Personal safety
a) Wear ear protection. Excessive
noise may lead to a loss of hearing.
b) Use the auxiliary handle supplied
with the tool. Loss of control of the
tool may lead to injury.
2.2 Electrical safety
a) Before beginning work, check the
working area (e.g. with a metal
detector) to ensure that no con-
cealed electric cables or gas and
water pipes are present. External
metal parts of the tool may become
live if, for example, an electric cable
is damaged inadvertenly. This pre-
sents a serious risk of electric
shock.
b) Check the condition of the supply
cord and its plug connections and
have it replaced by a qualified elec-
trician if damage is found. Check the
condition of the extension cord and
replace it if damage is found. Do not
touch the supply in the event of it
suffering damage while working.
Disconnect the supply cord plug
from the socket. Damaged supply
cords and extension cords present a
risk of electric shock.
2.3 Work area
a) Ensure that the workplace is well
lit.
8
Printed: 07.07.2013 | Doc-Nr: PUB / 5070788 / 000 / 00
b) Ensure that the workplace is well
ventilated. Poorly ventilated work-
places may be injurious to the
health due to exposeure to dust.
2.4 Personal protective equipment
The user and any other persons in the
vicinity must wear suitable eye protec-
tion, a hard hat, ear protection and pro-
tective gloves when the tool is in use.
Breathing protection must be worn if
no dust removal system is used.
Wear eye Wear ear
Wear a
protection protection
hard hat
Wear Wear
protective breathing
gloves protection
The general safety precautions for pow-
er tools contain all product-specific
precautions for the power tool
described in these operating instruc-
tions. The precautions listed under (1.3
c, d, f, g) are not relevant to this power
tool.