Unpacking; Intended Use; Safety Information - ACD GRUPPE M266 Set Kurzübersicht

9 Unpacking

Package contents:
•
Device with internal battery
•
Docking station with power supply unit
•
Brief overview
Check that all components are undamaged and that all package contents are present.

10 Intended use

The M266 Set (M266/DS266) data acquisition system is a solution for the mobile acquisition and transfer
of data. Do not use the system in explosive areas.
Observe all warning information regarding the use of wireless devices.
The supplied power supply unit (see Point 1) is only intended for use with the M266 Set.

11 Safety information

Please read the following information. It serves to ensure your safety as well as the operational readiness
of the device.
ATTENTION
ATTENTION
M266_Set_Kurzübersicht_V1 01_de_en.doc
Only original ACD power supply units and ACD-approved batteries
may be used for the operation of the M266 and the DS266! The
utilisation of non-approved
destruction of the device. Remove the battery from the device if it
is not used for an extended period of time.
Never look directly into the beam of the laser. Always switch off
the device during cleaning.
The laser classification is stated upon one of the stickers on the device.
components can lead
Laser beam
exit
to the
8 / 12