ZTE Axon Kurzanleitung Seite 14

highest transmitting power, the actual SAR of
this device while operating is typically below
that indicated above. This is due to automatic
changes to the power level of the device
to ensure it only uses the minimum power
required to communicate with the network.
* The tests are carried out in accordance with
EN 50360, EN 50566, EN 62479, EN 62209-­
1, EN 62209-­2.
** Please see body worn operation.
Important safety information regarding radio
frequency radiation (RF) exposure:
To ensure compliance with RF exposure
guidelines the phone must be used with a
minimum of 15 mm separation from the body.
Failure to observe these instructions could
result in your RF exposure exceeding the
relevant guideline limits.
12