Dell Precision M2300 Schnellreferenzhandbuch Seite 23

Starting the Dell Diagnostics From the Drivers and Utilities Media
1 Insert the Drivers and Utilities media.
2 Shut down and restart the computer.
3 When the boot device list appears, highlight CD/DVD/CD-RW Drive
4 Select the Boot from CD-ROM option from the menu that appears and
5 Type 1 to start the menu and press <Enter> to proceed.
6 Select Run the 32 Bit Dell Diagnostics from the numbered list. If
7 When the Dell Diagnostics Main Menu appears, select the test you want
Dell Diagnostics Main Menu
1 After the Dell Diagnostics loads and the Main Menu screen appears, click
Option
Express Test
Extended Test
Downloaded from www.Manualslib.com
When the DELL logo appears, press <F12> immediately.
If you wait too long and the Windows logo appears, continue to wait until
you see the Windows desktop. Then shut down your computer and try
again.
NOTE:
The next steps change the boot sequence for one time only. On the
next start-up, the computer boots according to the devices specified in the
system setup program.
and press <Enter>.
press <Enter>.
multiple versions are listed, select the version appropriate for your
computer.
to run.
the button for the option you want.
Function
Performs a quick test of devices. This test typically takes 10 to
20 minutes and requires no interaction on your part. Run
Express Test first to increase the possibility of tracing the
problem quickly.
Performs a thorough check of devices. This test typically
takes 1 hour or more and requires you to answer questions
periodically.
manuals search engine
Quick Reference Guide
23