Axis Q1615-E Installationsanleitung Seite 22

AXIS Q1615-E Mk II Network Camera
4. Loosen the bracket adjustment screw to focus the camera; focus the camera according
to the instructions under Adjust zoom and focus for included lens on page 22.
5. Also see to access the video stream.
6. Attach the safety wire in the top cover to the tab in the bottom cover. See image under
Product overview on page 10
7. Optionally insert an SD memory card (not included) into the SDHC (Secure Digital High
Capacity) card slot. A standard or high capacity SD card is required to store images
locally in the camera.
Connect the Cables
NO NO TICE NO TICE TICE
Due to local regulations or the environmental and electrical conditions in which the
product is to be used, a shielded network cable (STP) may be appropriate or required. Any
network cables that are routed outdoors or in demanding electrical environments shall be
shielded (STP) and intended for their specific use.
Note
To locate the different components see illustrations under Product overview on page 10.
1. Optionally connect external input/output devices, see Connectors on page 18.
2. Connect the network cable to the network connector in the housing.
3. Fasten the shoe ring mounted grounding wire and washer with the grounding screw.
Find the device on the network
To find Axis devices on the network and assign them IP addresses in Windows®, use AXIS IP Utility
or AXIS Device Manager. Both applications are free and can be downloaded from axis.com/support.
For more information about how to find and assign IP addresses, see the document How to assign
an IP address and access your device on the device page at axis.com.
Adjust zoom and focus for included lens
1. Go to Settings > Image > Focus and click Show AF area.
2. Adjust the autofocus area to cover the part of the image that you want to be in focus.
If you don't select an autofocus area, the camera focuses on the entire scene. We
recommend that you focus on a static object.
3. Adjust the Zoom level.
4. Click Autofocus.
Note
If the camera does not focus, try to calibrate the optics in System > Maintenance, and
perform auto focus again.
22