Axis Q1615-E Installationsanleitung Seite 16

AXIS Q1615-E Mk II Network Camera
The control button is used for:
• Resetting the product to factory default settings. See page 24.
• Connecting to an AXIS Video Hosting System service. To find out more about this
service, see axis.com
Function button
Note
Focus assistant is only valid for optional P-iris, DC-iris or manual iris lenses.
Use the function button to activate the following functions:
Leveling assistant - This function helps to make sure the camera is level. To start the leveling
assistant, press the button for about 3 seconds. Press again to stop the leveling assistant. The
status LED and buzzer signal assist leveling of the camera, see Status LED behavior and buzzer signal
for leveling assistant on page 14. The camera is level when the buzzer beeps continuously.
Focus assistant - This function is used for enabling the focus assistant. To enable the focus
assistant, press and very quickly release the button. Press again to stop the focus assistant.
16