Operating Modes; Video Mode - Yukon Photon Rt Betriebsanleitung

USB disconnection.
In USB Mass storage device connection mode.
On disconnection the unit remains "off". The unit must be switched on to continue operation.
In Power connection mode
Once disconnected from PC, the unit switches off. Once the unit is disconnected from a power bank or AC
power adapter, the unit will automatically switch to internal batteries, provided the batteries are fitted and
have sufficient charge.
If the unit is switched off on connection to a PC, the display does not show anything. The unit will not be
detected by the PC until it is switched on (brief press of the ON button).
14

OPERATING MODES

The operating modes are as follows:
Video (video recording)
Photo (image capture)
R eview (video and image review)
When first switched on, the unit is in Video mode. Switch between operating modes by a long press of the
REC (11) button. This enables you to cycle between modes (Video->Photo->Review->Video...)

VIDEO MODE

Video recording mode is the default mode.
Video recording mode is shown by the
Sound recording is shown by the
11
icon on the display.
icon on the display.
Full magnification is shown with by special icon (i.e. 4.5x/9x or 6x/12x)
on the display.
To start or stop video recording, briefly press the REC (11) button.
Video clips are saved in the internal Flash memory when video recording is
stopped or the unit is turned off.
Video recording indication on the display:
The REC icon appears in place of the "VIDEO" icon.
Display icons are not recorded.
You can enter and navigate the menu during video recording.
Note! You can stop recording video only after exiting the menu.
Note: maximum duration of a recorded file is seven minutes. After this
time expires a video is recorded into a new file. The number of recorded
files is limited by the capacity of unit's internal memory.
VIDEO mode ZOOM SOUND
9x
01:42
04:23pm
Current time
Record timer ZOOM SOUND
9x
Video
REC 00:42
recording
00:02
Elapsed
recording
time
12