Getting Started - Medtronic CareLink USB Bedienungsanleitung

MP6025822-22C1 / A

Getting Started

IMPORTANT: If the CareLink USB drivers are not yet installed, or if you are not sure if the drivers
are installed, do not connect the CareLink USB. See the instructions below for installing the
CareLink USB drivers.
Healthcare professionals: If you are a healthcare professional using CareLink
Management Software for Diabetes, the CareLink USB drivers will be installed as part of the
CareLink Pro program installation.
Patients: If you are a patient using CareLink
Diabetes, you must follow these instructions BEFORE connecting the CareLink USB to your
computer.
Note: If you are not using Windows Vista, Windows 7, Windows 8 or Windows 8.1, continue
directly with step 2.
1. Make sure that User Account Control is enabled. By default, User Account Control is already
enabled, so it is likely that you do not have to enable it.
a. Close Internet Explorer. (If you are using Windows 8 or 8.1, close Internet Explorer and
do not use Internet Explorer from the start screen.)
b. Navigate to Start > All Programs (or Programs). (If you are using Windows 8 or 8.1, from
the Start screen, click on the Desktop tile.)
c. Right-click on the Internet Explorer menu item. (If you are using Windows 8 or 8.1,
right-click on the Internet Explorer icon from the task bar. Then right-click on Internet
Explorer in the pull-up menu.)
d. Select Run as Administrator.
e. When the User Account Control window is displayed, click Allow or Yes.
Note: If you are not logged in as an administrator on your computer, you may be asked
to enter an administrator user's password.
2
Personal Therapy Management Software for
™
Pro Therapy
™