Setting Procedure; General Information - Baume And Mercier AUTOMATIC HOUR Bedienungsanleitung

SETTING PROCEDURE

To set your watch, please perform these steps in the following order:
Setting the day of the week
1. Pull the crown to Position 3.
2. Turn the crown in either direction until the day hand (K) indicates the day immediately preceding
the desired day.
3. Position the hands (A, B) at 6 a.m.
Setting the date
4. Reset the crown to Position 2.
5. Turn the crown so as to move the date (E) chronologically forward to one day before the desired
date.
Setting the time
6.
Pull the crown to Position 3.
7. Turn the crown clockwise to advance the hands (A, B).
8. Continue turning the crown until the desired day (K), date (E) and time (A, B) are displayed.
For months with less than 31 days, the date must be changed manually at the end of the month.

GENERAL INFORMATION

Care recommendations
Your Baume & Mercier watch was both designed and manufactured with great care. Please read our
recommendations for use and care on www.baume-et-mercier.com.
International warranty
Your Baume & Mercier watch is covered by the Baume & Mercier International Warranty.
The conditions of the Baume & Mercier International Warranty are available on www.baume-et-
mercier.com/customer-service/warranty.html.
Other information
If you have any questions, please visit our website www.baume-et-mercier.com.
You can also contact our authorized retailers in your country (list available on our website www.baume-
et-mercier.com) or contact us directly via our website using the contact form or by calling one of our
Client Relations Centers (www.baume-et-mercier.com/customer-service/contact-us.html).
Setting procedure – Automatic - hour, minute, centre seconds, retrograde date, day, power reserve 5