Adding Base Station - IMOU Cell Pro Kurzanleitung

Note:
- Press the SYNC button to pair with the base station.
- Press and hold the Reset button for 5 s to reset the base station.
- You can connect USB drive to the USB port to record video.
Caution:The base station might format the USB drive, be sure to backup your data.
The pattern of the system indicator is included in the following table.
System Indicator Status
Off
Blue light flashing
Yellow light flashing
White light flashing
White light stay on for 10 s, then off
Red light stay on for 10 s, then off
White light stay on for 1 s, then off
White light quick flashing
5

Adding Base station

Step 1 Power up the base station, and then connect the Ethernet port to your
router with the network cable.
Step 2 The system indicator stays on with white light for 10 s, and then off, which
means the base station is connected to the network.
Step 3 Scan the following QR code or serach "Imou" in Google Play or App Store
to download and install the Imou App.
Device status
 Not powered up
 Operating properly
Booting up
Waiting for network connection
Waiting for pairing with cameras
Pairing succeeded
Pairing failed
Reset completed
Firmware updating
5