Studer SBM-01 Bedienungsanleitung Seite 16

Temperature (°C or °F) displays the present battery
temperature. This readout is automatically activated when
Function F11 is set to AU and the optional temperature
sensor is connected to the SBM-01. When connection with
the temperature sensor is lost, the display will return four
dashes (- - - -). The Temperature unit can be selected in
Function F15.
The SBM-01 also indicates when the battery needs to be recharged
again or when the battery is fully charged. These indications are made
using the CHARGE BATTERY FULL indicators at the bottom, or the five
segment bargraph at the top of the display. In the table below the four
possible combinations of these indicators are explained.
CHARGE BATTERY (flashing). The state-of-
charge of the battery has dropped below the
adjusted 'discharge floor' (see Function F05). The
battery needs to be recharged as soon as
possible.
BATTERY FULL (flashing). The battery is fully
charged and the battery charger possibly operates
in the 'float' stage. The charger may be turned off.
The monitor is synchronized with the battery!
CHARGE BATTERY FULL (flashing). Charge the
battery completely full! This indication will arise
when the SBM-01 decides that the monitor needs
to be synchronized with the battery (for example
after a number of charge/discharge cycles, after a
reset or right after power-up).
STATE OF CHARGE BARGRAPH. This bar
represents the state of charge in five steps until
the 'discharge floor' (see Function F05) is reached.
A fully charged battery is represented by five bar
segments. When the battery is discharged, the bar
disappears and the message 'CHARGE
BATTERY' will arise on the display.
SBM-01 high precision battery monitor
15