Climate Class - Hoshizaki Snowflake GII Bedienungs-, Wartungs- Und Montageanleitung

Sno wf lak e GII

CLIMATE CLASS

The cabinet is designed to run within specific ambient temperature and humidity levels. These are
set out in the climate class system. These levels are never to be exceeded. The climate class for this
product can be found on the product description label.
Climate Class
4
5
FIRST ACCEPTANCE AND CONTROLS
This cabinet was packed in protective packaging material for shipping. On delivery, please check the
cabinet for any possible transport damage and that the cabinet model is what you ordered.
All operations listed below must fully comply with all local bylaws and safety regulations. Observe all
current safety rules when operating this product.
TRANSPORTING
When lifting the product using machinery, the lifting capacity of any machinery must be verified prior
to undertaking any such procedures.
When using a fork truck to move the product, please ensure that the forks are inserted into the
appropriate openings in the pallet.
Once moving, attention must be paid to the stability of the product. If the centre of gravity is not
central to the product, which will make it prone to tip over. When lowering the product with a fork
truck ensure this is done slowly and with care.
Should it become necessary to transport any upright cabinets in a horizontal position, please make
sure the cabinet has been upright for at least 2 hours before operating. It is not recommended to
transport upright cabinets in the horizontal position and any damage arising from such action is not
covered by warranty.
Recommendations written on the outside of the transport packaging are for the user's benefit.
Therefor the following recommendations should be observed:
• Carry the product carefully.
• Keep the product dry.
• Do not use the top of the cabinet for storage.
Ambient Temperatures and Humidity
+30°C with %55 RH
+40°C with %40 RH
IMPORTANT
IMPORTANT
ATTENTION
EN 3