eta ROSALIA Bedienungsanleitung Seite 12

GB
position 2 – max temperature and air flow intensity
position – decreases the flowing air temperature
A2 – attachment arrest button
A4 – loop for hanging
B – attachments
B1 – round brush
B1
B
B2
III. INSTRUCTIONS FOR USE
Remove all the packing material and take out the hair straightener. Remove all possible
adhesion foils, stick-on labels or paper from the appliance. Press the arrest button A2,
slide on the desired attachment B on the propulsion unit A with a slight push. Plug the fork
of the supply cord A5 into the el. socket. Switch the switch A1 either to position 1 (warm
air) or to position 2 (hot air). Turn the appliance off by switching the switch A1 to position
0. Remove the attachment from the propulsion unit by pressing the arrest button A2 and
pulling off. Pay special attention when changing attachments (they may be hot).
Use – for slightly wet hair, never wet hair. Moisten dry hair slightly. Before using the hair
brush, comb the hair so that it is not dishevelled. For more permanent effect you can use
styling mousse. When styling hair, never wind very thick hair locks on the brush. Let hot
air take effect on the hair till the hair is warm when touched. Then unwind the curls. Let the
hairstyle cool down before any possible combing.
Hair styling and volume
Put a hair lock on the round brush, either lift the hair right at the roots or move the brush
along the hair to the roots and then wind the hair in the required direction, making not more
than 1.5 twists.
function
The air flow temperature will decrease which will allow quick cooling and fixation of the
hair when finishing styling. The function is be turned off simply by pushing the switch in the
opposite direction.
16 mm
A2
A3 – turning joint of the power supply
A5– supply cord
B2 – round brush
A1
12 / 29
19 mm
A3
A
A4
A5