The Expert Menu - Atlantic DORIS DIGITAL Bedienungs- Und Montageanleitung

To access the device's advanced functions, press
for over 3 seconds.
MENU
PARAMETERS
Information
TEST

The EXPERT menu

General
Backlight
Reset
T° calibration
Function config
Max temp.
Restrictions
Boost
Access contr.
PIN code
Heating reg.
Identification
Version
Main Body
and at the same time
Sound
To activate or deactivate the key sound.
To select the language .
Language
To select whether to turn the backlight on or off
the display when the unit is idle
General
To adjust the setpoint temperature to the
temperature recor ded in the room if you notice a
difference after several hours' heating.
The calibration value is between -3° C belo w and +3°
C above the set temperature.
E.g.: if the room T° = 18°C and the set T° = 20°C ,
select -2.0°.
To record a maxim um setpoint temperatur e which
may not be exceeded (between 22°C and 28°C , s e t b y
default at 28°C) .
To set the maxim um boost time:
can range from 15 to 120 minutes for non-fan and 10
to 60 minutes for models with fan.
To limit access to the commands.
You may choose total access, access to temperatur e
only or no access. In this last case, the unit's commands
are no longer accessible .
To activate the saving of an Expert Menu personal
access code or not.
Once activated, the Expert Menu access is coded.
You may note your personal code here
To deactivate it, go back to the Expert Men u, enter
your personal code and go back to Parameters =>
Restrictions => PIN code.
Information about the appliance's power.
Appliance identification.
Version identification.
Heating element operating verification.
33