Axis M1004-W Bedienungsanleitung Seite 39

Uninstalling a camera
On the TaHoma interface home page, click the tab
➔ ■
AXIS
Click the tab.
➔ ■
Select the desired camera and click Delete.
➔ ■
Follow the instructions on the screen, which will guide you step by step.
➔ ■
Note: You can save the recorded photos by clicking Export. Otherwise, your photos will be deleted
permanently.
Changing the name of a camera
On the TaHoma interface home page, click the tab
➔ ■
AXIS
Click the tab.
➔ ■
Select the desired camera and click Rename.
➔ ■
Follow the instructions on the screen, which will guide you step by step
➔ ■
Changing the password of a camera
For greater security and privacy, it is advisable to customise the password.
IP Utility
Run the
➔ ■
Choose the desired camera by double-clicking its name.
➔ ■
A window for managing the password opens, with the option of changing it.
Remember to update this new password in the camera's configuration in the Somfy home motion
central unit's TaHoma interface, as described earlier.
Resetting the camera to factory settings
Resetting will result in the loss of all data, recorded photos as well as all settings made previously. To
save your photos, see the instructions on the next page.
Disconnect the camera's power supply.
➔ ■
Press the button 1 and hold it down while
➔ ■
connecting the power supply again.
Keep holding the button down until the
➔ ■
indicator light around the lens flashes (this will
take about 10 to 30 seconds).
Release the button.
➔ ■
The camera is reset.
software from the Axis Utilities CD.
.
.
39