Axis M1004-W Bedienungsanleitung Seite 38

Configure the camera's password.
➔ ■
Select the power line frequency used in your country (generally 50 Hz).
➔ ■
Select the desired Wi-Fi network from the displayed list of wireless settings.
➔ ■
Tick the 2nd option: WLAN.
➔ ■
Select the Wi-Fi* network security type.
➔ ■
Then type the security key or passphrase for the Wi-Fi* network.
➔ ■
(*: depending on the settings of the selected Wi-Fi network)
Once the installation on Wi-Fi is complete, disconnect the RJ45 Ethernet cable connecting the camera and
your ADSL box/modem to use the Wi-Fi wireless connection.
Place the camera wherever you want (note that the camera should however be connected to the mains).
38
Enter the new password.
Confirm it by entering it again.
Validate the modification.