Heating Cable Installation Instructions SB112H/113H
Important Notes
•
When installing, use sharp-edged tools
•
The connection to the mains must be carried out by authorized personnel
•
For the best possible protection of people, animals and equipment, a residual
current circuit breaker (FI 30 mA) is required.
WARNING !
•
The heating cable HKSB 24V / RBH may only use a safety low voltage transformer
with max. 24 Volt
•
Connect the heating cable HKSB 230V / RBH directly to the current supply (e.g.
junction box). Alternatively, a commercially available grounded plug can be fixed
to the cable ends.The grounding of the cable is not essential, because it is a class
II product (double insulated, no earth wire available).