Declaration Of Conformity - Weidmuller 1037 Bedienungsanleitung

Declaration of conformity

NOTE
The instrument complies with class II and pollution deg.2 in-
door use, overvoltage CAT.III 1000V of the IEC 1010-1
(EN61010-1) and UL 94 EA PAT. PENDlNG E209641 stan-
dard. If the equipment is used in a manner not specified, the
protection provided by the equipment may be impaired.
When servicing, use only specified replacement
parts or equivalent.
The symbols used on this instrument are:
Caution, risk of electric shock
Caution, refer to accompanying documents
Equipment protected throughout by Double insula-
tion (Class II)
AC current
DC current
Ground
C
This product complies with the requirements of the following
European Community Directives: 89/336/EEC (Electromag-
netic Compatibility) and 73/23/EEC (Low Voltage) as amend-
ed by 93/68/EEC (CE Marking).
However electrical noise or intense electromagnetic fields in
the vicinity of the equipment may disturb the measurement
circuit. Measuring instruments will also respond to unwanted
signals that may be present within the measurement circuit.
Users should exercise care and take appropriate precautions
to avoid misleading results when making measurements in
the presence of electromagnetic interference.
20