Declaration Of Conformity; Fields Of Application - Weidmuller 125S Bedienungsanleitung

s006_Model_125S 23.10.2003 12:42 Uhr Seite 14
C

Declaration of conformity

The instrument complies This product complies with
with class II, overvoltage the requirements of the fol-
CAT.III of the IEC 1010-1(EN lowing European
61010-1) standard. If the Community Directives:
equipment is used in a man- 89/336/EEC (Electro-
ner not specified, the pro- magnetic Compatibility) and
tection provided by the 73/23/EEC (Low Voltage) as
equipment may be impaired. amended by 93/68/EEC (CE
Marking).
When servicing, use However electrical noise or
only specified re- intense electromagnetic
placement parts or fields in the vicinity of the
equivalent. equipment may disturb the
measurement circuit.
The symbols used on this
Measuring instruments will
instrument are:
also respond to unwanted
Caution, risk of electric
signals that may be present
shock
within the measurement cir-
cuit. Users should exercise
Caution, refer to ac-
care and take appropriate
companying documents
precautions to avoid mis-
Equipment protected
leading results when making
throughout by Double
measurements in the pres-
insulation (Class II).
ence of electromagnetic in-
terference.
Alternating current
Direct current
Ground

Fields of application

The measuring instrument is will lead immediately to the
intended for use in applica- expiry of all guarantee and
tions as described in the warranty claims on the part
operating instructions only. of the operator against the
manufacturer.
Any other form of usage is
not permitted and can lead
to accidents or destruction
of the device. Any misuse
14