Playtive Junior IAN 311358 Gebrauchsanleitung Seite 10

Assembly
Select a suitable area that is clean and level
and has enough room to unpack and unfold the
pool.
1. Open the valve cap (1b) on the cushion at the
end of the slide (1a) and fill it with water. Then
close the valve cap again (Fig. A).
2. Lift up the flaps (1c) and secure the item with
the two ground spikes (Fig. B).
3. Connect a garden hose to a suitable hose
coupling and connect it to the water connec-
tion (1d) on the item (Fig. C).
Dismantling
Remove the garden hose and the ground spikes.
Empty the cushion at the end of the slide. Let the
item dry completely before folding it up.
Repairs
Small leaks or holes can be mended with the
enclosed repair patch.
Important!
Do not use the item for 20 minutes after
repairing it!
Do not use the patch for leaks or holes
on the seam.
• Clean the area around the leak thoroughly!
The area must be dry and free of grease.
• Cut out a piece of the repair material that is
large enough for its edges to extend over the
damaged area by about 1.3cm.
• Peel the patch off the paper, place it on the
damaged area and press on it firmly.
Storage, cleaning
The item must always be stored clean and
dry, and at room temperature. Only clean the
product with water or soapy water and never
with harsh cleaning agents.
12 GB/MT
Disposal
Dispose of the item and its packaging materials
in accordance with current local regulations.
Packaging materials, such as foil bags, must be
kept away from children. Keep the packaging
materials out of reach of children.
Dispose of the equipment and packag-
ing in an environmentally-friendly
manner.
The recycling code is used to identify
various materials for recycling. The code
consists of the recycling symbol – which
is meant to represent the recycling cycle
– and a number which identifies the material.
Servicing
IAN: 311358
Service Great Britain
Tel.: 0800 404 7657
E-Mail: deltasport@lidl.co.uk
Service Malta
Tel.: 80062230
E-Mail: deltasport@lidl.com.mt