Exploded Diagram - Yamaha GP1300R Zusammenbauanleitung

EXPLODED DIAGRAM

Step Procedure/Part name
5 Band
6 Band
7 Throttle cable
Q'ty
1 Fasten the QSTS cables and handlebar switch
lead with band at the handlebar.
1
1
Installation steps:
• Install the throttle cable end into the throt-
tle lever.
• Fit the seal into the groove in the bracket.
• Turn the adjuster 1 in/out until the speci-
fied free play is obtained.
Throttle lever free play e:
4–7 mm (0.16–0.28 in)
Turn in
Turn out
• Tighten the locknut 2.
– 5 –
Service points
Free play is increased.
Free play is decreased.
E