Pioneer PDK-FS01E Bedienungsanleitung Seite 7

7 Moving the stand
Before moving the stand, insert the attached hexagonal
wrench into the attachment hardware under the PDP
attachment bracket and the column to fix the plasma display
so that it will not rotate, then hold the column to move the
floor stand.
Insert
If you cannot hold the column, pull it holding the base under
the ornamental base.
Precaution
¶ Do not move the floor stand by holding the plasma
display, speakers, shelf glass, or ornamental base.
If you do, you will damage these components.
¶ To move the floor stand over a level difference on the
floor, detach the ornamental base and lift the stand by
holding the base.
¶ Do not lift up the ornamental base.
It is dangerous to do this because the ornamental base
may be displaced or damaged.
Always lift it by holding the base.
7 Preventing Overturning
1 Attach a strong cord to the hole on the top of the PDP
attachment bracket.
2 Fix the cord to the wall or a column.
• Use cord and hooks sold on the market.
2
1
7