Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 16
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will
know how to operate your model properly. After you have
finished reading the instructions, put them away in a safe place
for future reference.
In some countries or regions, the shape of the power plug and
power outlet may sometimes differ from that shown in the
explanatory drawings. However the method of connecting and
operating the unit is the same.
CAUTION
This symbol refers to a hazard or unsafe practice which
can result in personal injury or property damage.
Cautions
1. Do not lean on the plasma display and do not get on
the shelf.
2. It is extremely dangerous to fail to install it properly,
because it might fall over or another accident might
occur. Always attach the brackets to the plasma
display after laying down the plasma display.
3. Always choose an installation location that is strong
enough to bear the combined weight of the stand and
the display.
The product weights are listed on Page 8.
4. Always be extremely careful to install it at a location
that is level, flat, stable, and can bear the load uni-
formly.
5. Do not install it outdoors or near a hot spring bath or
the seashore.
6. Do not install it where it is exposed to vibration or
impact.
7. Do not install it on any plasma display other than the
designated plasma display, do not modify it, and do
not use it for any other purpose.
2

7 Special Features

¶ A design that creates an atmosphere in which
the display seems to float in space
¶ Easy to move thanks to the attached casters
K015 En
¶ Its gooseneck lets you easily rotate the direction
of the screen (left or right 30°)
8.
Obey the installation instructions and firmly insert the
screws at all stipulated locations. If you do not, the
display may be damaged or fall over after it has been
installed.
9.
Always have at least two people install it on the display
so that the work is done safely.
10. Do not begin the installation work until after you have
disconnected the power to the display and to the
peripheral equipment, and have removed the power
plugs from the wall sockets.
11. Because of the characteristics of the glass, it breaks
easily if anything strikes its edge.
Do not let anything strike the edge of the glass.
And be extremely careful to prevent any small children
from striking the edge of the glass to protect them from
injury.
12. Be extremely careful to keep your hands out of the
oscillating part. If you do place your hand in this part,
you will injure it.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis