Attaching The Presser Foot Shank - Singer 3321 Bedienungsanleitung

Attaching the Presser Foot Shank

EN
Raise the presser foot bar (a) with the presser foot lifter.
Attach the presser foot shank (b) as illustrated. (1)
Attaching the presser foot
Lower the presser foot shank (b) using the presser foot lifter,
until the cut-out (c) is directly above the pin (d). (2) The
presser foot (f) will engage automatically.
Removing the presser foot
Raise the presser foot using the presser foot lifter. (3)
Raise the lever (e) and the foot disengages.
Attaching the e dge/ quilting
Attach the e dge/ quilting guide (g) in the slot as illustrated.
Adjust as needed for hems, pleats, quilting, etc. (4)
Attention:
Turn power switch to off ("O") when carrying out any of
the above operations!
guide
a
b
1
e
3
41
a
e
c
b
d
f
2
g
4